The T3512 is a one door Smart Card Access Control system that has everything you need for controlling access through a single door. It comprises a T3511 controller, WinACnet PC software, magnetic door release, push button, break glass and 10 Smart Cards. In fact, everything you need to get started! – and an incredibly low price of just £495 for the whole system, it’s the best money can buy! The T3512 includes:

• 1 off T3511 Door Access Controller; can be linked to up to 128 other T3511's

• Holds details on up to 10,000 Smart Card holders (badge does not need to be removed from a wallet or purse to be used)
• Latest .NET PC Based Access Control multi-lingual software: *requires Windows 2000, XP or Vista
• Easy setup of badge holders and security patterns
• Quick activity analysis and reporting
• Fire Roll Call from fire panel input
• Network Connection
• Email Warnings & Alerts
• Speech output announcing flagged arrivals and security breaches

• Expandable, upgradeable modular security system
• Burglar alarm output for forced entry
• Remote Monitoring via Modem
• Power fail battery backup *battery available at additional cost
• Early warning LED's
• Audible alerts
• Tamper detection
• Adheres to international security standards applicable to Access Control systems; EN50133 Parts 1, 7 and 2; GW18, PC79 and DD243I2002.
• Telephone Help Desk & lifetime maintenance support available
• Free Software Updates *to those with our after care service
• Magnetic door release with built in door monitoring
• Tensor Smart Card scanner
• Push button for exit
• Break glass for emergency exit
• 10 Tensor Smart Cards

Stand-alone Unit

The T3512 can be installed without a PC connection. Here, it is easily installed and setup using a Master Card to add or delete users. Whilst the T3511 controller performs best when connected to a PC, using it in stand alone mode means it can function in the simplest of environments, with minimal fuss. The T3511 is programmed with up to three Master Cards using feedback LED’s and switches. This offers the user a quick and easy method of adding or removing access rights for individuals. Any standard burglar alarm can be connected directly to the T3511 so an audible and/or visual alert is immediately triggered from a forced entry.

Connected To a PC or PC network

Connecting the T3511 controller to a PC brings the whole system to life and gives you the embryo of a fully computerised Access Control and Security system. The plug & play features allow up to two Smart Card scanners, one door lock and other security equipment to be controlled by the WinACnet software. This latest .NET software also controls the list of valid badge holders, access patterns and audit transactions monitoring and logging every event; providing irrefutable proof of where and when an individual gained access to specific areas. WinACnet stores information such as calendars and photographs if required. WinACnet allows you to create sophisticated movement and access analysis reports of all badge holders as well as flagging up any irregular activity.

WinACnet creates alarm messages when predetermined actions take place, or if a forced entry occurs. These alarms are immediately emailed to a specified address. Optionally a warning email can be sent if communications to the PC are lost. Free software upgrades are available to those with maintenance contracts, which means the system is always up to date.

Like the T3510 four door controller, the T3511 has a speech output via the WinACnet software. This delivers clear English spoken alerts when pre-defined ‘flagged’ actions take place. For example, when the door is accessed by a specific individual, or if the door is left open longer than a specified time.

The T3511 continuously stores access transactions and alarm events in it’s non-volatile cyclic buffer memory. If communications with the PC or PC network is lost for any reason, the data is kept safe within this buffer and transmitted to the PC once communications is restored. Audible and visual warnings alert the user if the memory buffer is nearly full, again ensuring a secure method of preventing data loss.

Examples of T3512 Configurations:

	Smart Card reader entry with push button exit Fig 5 shows how a single smart card reader can be used to gain entry to a door and a push button is used to exit. Of course, if the Smart Card reader is mounted on, say, a glass window then the same reader can be used to gain entry or exit. This is because Tensor Smart Card readers can be read from either side of the reader. A break glass unlocks the door, from the inside, in an emergency.
	Smart Card entry and exit Fig 6 shows how to use the T3511 with two Smart Card readers to control entry and exit. This gives better management control as the T3511 can differentiate which reader was used so you know who is left in the building. This is essential for producing an accurate Fire Roll Call register. Again, a break glass unlocks the door, from the inside, in an emergency.
	2 doors, Smart Card & Fingerprint entry with Smart Card only exit Fig 7 shows how a Tensor biometric fingerprint reader can replace a Smart Card reader. Usually entry would be via Smart Card and fingerprint. Exit would be via a Smart Card alone. Biometrics is not the panacea for all applications but does have the advantage of providing irrefutable proof of who went through the door.
	Door control plus Movement Monitoring Fig 8 shows the versatility of the T3511 using passive infrared sensors (PIR’s) and the WinACnet software to create a register of date & time stamped movement transactions recorded by the PC. This feature shows when and where movement in an area has taken place, and can trigger the alarm if required.

T3511’s can be networked together with other T3511’s, the four doors controller (T3510) or other larger Tensor door controllers or Time & Attendance equipment to create a powerful computer controlled security infrastructure.

The T3511 is the ideal way to start off small, but to have the flexibility to grow at a later date; So much better than installing a door controller that only operates as a ‘stand alone’ unit with no future expansion capability. As your security network grows and requires more control points, further T3511’s or T3510’s can be installed, working side by side within the same network.  This “building block” approach is the most cost effective way to install Access Control.

The T3511 has a volt-free input that can be wired directly into your fire alarm system. When the alarm is activated, the door immediately opens for a quick and safe evacuation of personnel. Simultaneously, a Fire Roll Call report is printed on a remote, secure serial printer.

Installing a T3512 door access system is just the beginning to providing your organisation with a platform and route for installing other Tensor products such as Time & Attendance, Visitor Monitoring, Automatic Number Plate recognition and Digital CCTV.

The modem facility within the T3511 enables you to install a simple system at a remote graphical location where there is only power and a phone line. The T3512 System comes with everything you need to start controlling door access right out of the box! The system comprises:

The Tensor LOCK5 is a world-class device for securing a door using a magnetic door release. Very strong, beautifully designed, it incorporates forced entry detection and green & red LED lamps to provide visual verification the unit is working.

Millions of “entries” and “exits” are made by people, every day, throughout the world, using a Tensor Smart Card and Scanner to gain entry or exit to buildings, car parks, turnstiles and secure facilities. A reliable product that is known for it’s speed and ease of use.

Sturdy, basic and practical, these Tensor products provide the Health & Safety finishing touches to your T3512 system.

To request a datasheet click here.

• Windows 2000, XP Professional or Vista
• 50 MB of free hard disk space minimum (for initial installation)
• RAM - MicrosoftTM recommended amount for operating system
• CD ROM drive(for installation)
• 1 x USB port(camera)
• 1 x Serial port(bar code reader)
• 1 x Parallel port
• Further USB ports for the optional fingerprint reader (1 USB port per device).